Laser PCB Depanelizer – If Contemplating a PCB Laser Cutting Machine, You Should Read Through This Guide.

Depanelization will be the cutting of break-out tabs which still fasten individual printed circuit boards into a panel array. This manufacturing step is connected only indirectly together with the actual production procedure of a printed circuit board and also the later function. Therefore, time essental to milling systems for the PCB Router might be granted reluctantly, or may lead to bottlenecks from the production cycle.

LPKF circuit board plotters are a genuine alternative for mechanical depaneling multi-use boards. Inserting and aligning a panel is an easy and fast task using the blend of a vacuum table and fiducial recognition camera. The tabs are separated cleanly and precisely, causing a printed circuit board with the accurate outline.

LPKF Laser & Electronics has announced the accessibility of a new, higher-powered laser source choice for its MicroLine group of Laser PCB Depanelizer.

LPKF consistently offer its existing 6 watt laser source, but now all MicroLine depaneling systems can be alternatively provided with a 12 watt source of energy.

“A 6 watt power source is great for working together with thinner materials such as flex or rigid-flex materials,” said LPKF sales engineer Mirela Orlowski. “In contrast, the new 12 watt source of energy provides great efficiency when working with thicker materials for example 62 mils (1.57 mm) FR4.”The MicroLine family of systems consists 19dexjpky three series–1000, 2000, and 6000–which accommodate various application sizes and production quantities.

UV laser processing can be a low-stress substitute for mechanical PCB Punching Machine methods like routing or dicing. By using a virtual tool as opposed to a physical one, results of stress such as burring and damaged components are eliminated.